Anker Powerwave Pad Instructions
Anker Wireless Charger Powerwave Pad Lite Specs
|Size||100 x 100 x 11.2 mm / 3.9 x 3.9 x 0.4 in|
|Weight||67 g / 2.4 oz|
|RF Frequency band||110 kHz ~ 148 kHz (only for EU & UK)|
|Radiated H-filed||-3.49 dBμA/m @ 10 m|
Anker Powerwave Pad Lite LED Indicator
|Solid blue for 3 seconds, then off||Connected to power|
|Solid Blue||Charging mobile device|
|Flashing Blue||Metal or abnormal objects detected|
|Flashing Green||Overvoltage protection, indicating you need to switch to a 5V / 9V DC adapter|
Anker Wireless Charger Use Tips
You cannot charge your device wirelessly in these scenarios:
Using a case with a magnetic/iron plate;
Using a case with a pop socket;
Using an ultra-thick (> 5 mm) protective phone case.
Do not place any foreign objects between your device and the wireless charger’s surface, including metal pads on a car mount, credit cards, door keys, coins, metal, or NFC cards, which will make wireless charging fail or cause overheating.
Wireless chargers make charging more convenient than wired chargers but confined by current wireless technology, their charging speed is slower than that of wired chargers.
High temperatures will reduce charging speed and restrict power, which is a phenomenon common to all wireless chargers. It is recommended that you charge your device in environments with temperatures below 25°C / 77°F.
Both the protective phone case and the position of your device on the wireless charger will affect the charging speed. The farther it is placed from the center of the wireless charger, the slower the charging speed will be.
Important Safety Instructions
Do not disassemble.
Do not expose to liquids.For the safest and fastest charge, use original or certified cables.
This product is suitable for moderate climates only.
The maximum ambient temperature during use of this product must not exceed 40°C.
Open flame sources, such as candles, must not be placed on this product.Only use a dry cloth or brush to clean this product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio / TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator & your body.
Product Name: PowerWave Pad
The following importer is the responsible party.
Company Name: Fantasia Trading LLC
Address: 9155 Archibald Avenue, Suite 202, Rancho Cucamonga, CA, 91730, US
Telephone: +1 (909) 484 1530
This device complies with RSS‐216 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference.
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RF exposure statement:
The equipment complies with the IC Radiation exposure limit set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the user’s body and the handset, including the antenna. Thirdparty belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. This device in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out. The device complies with RF specifications when the device used at 20cm form your body
This device was tested for operations. To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Bodyworn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. Declaration of Conformity Hereby, Anker Innovations Limited declares that the product type A2503 is in compliance with Directives 2014/53/EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address: